Pre-mixed masonry cement repointing mortar

Boral's pre-mixed masonry cement repointing mortar is a factory-blended product combining masonry cement, sand, and colour pigments — mixed with clean water only on site. Boral offers a colour-matched range of repointing mortars in standard shades (cream, grey, charcoal, and other colours) designed to match common brick mortar joints on Class 2 strata facades. The factory-controlled blending eliminates the site batching errors in cement:lime:sand proportioning that cause strength variation and colour inconsistency when mixing from separate components. Each bag is a consistent pre-measured quantity — reducing waste and improving consistency across large repointing jobs. Available through Boral trade centres, Bunnings Warehouse, Mitre 10, and independent masonry merchants nationally. Confirm the AS 3700 mortar class designation and compressive strength from the current Boral product data sheet — masonry cement mortars vary in designation between product lines. Commission a 28-day cured trial panel before approving colour match.

BGC Cement is a Western Australian building materials manufacturer supplying pre-mixed masonry cement repointing mortar for Class 2 strata building remediation in WA and selected eastern state markets. BGC's pre-mixed mortar is a factory-blended product designed to be mixed with clean water only on site, eliminating site batching variability. BGC has strong distribution through the WA construction trade supply chain, including hardware merchants and masonry suppliers in Perth metro and regional WA. BGC's product range is concentrated on the WA market where they compete with Boral and Adbri/Cockburn — confirm current product availability and colour range with BGC before specifying on non-WA projects. The mix conforms to AS 3700 masonry mortar requirements — confirm specific mortar class designation with BGC's current product data sheet. Trial panel mandatory before colour approval.

Cockburn Cement (part of the Adbri group) supplies pre-mixed masonry cement repointing mortar for Class 2 strata building remediation in Western Australia and South Australia. As the dominant cement manufacturer in WA, Cockburn's pre-mixed mortar products are widely available through WA trade centres, hardware merchants, and masonry suppliers. The pre-mixed format ensures consistent proportioning on site without the variability of separate component batching. Cockburn's product range includes colour-matched options for standard mortar joint colours encountered on WA residential and commercial masonry construction. For SA projects, Cockburn products are available through Adbri distribution. Confirm current product name, colour range, and AS 3700 mortar class designation with Cockburn/Adbri before specifying. Trial panel mandatory before colour approval.

Hanson Building Products (now part of the Holcim group, formerly HeidelbergCement) supplies pre-mixed masonry cement repointing mortar through the Hanson and Holcim trade distribution networks in eastern Australia. Hanson has strong presence in NSW, Victoria, and Queensland through a network of batching plants and trade supply depots. The pre-mixed masonry cement mortar is factory-blended for consistent proportioning on site — add clean water only. Hanson's colour-matched repointing mortar range covers the most common mortar joint colours encountered on eastern states residential and commercial masonry construction. Note: Following the Holcim/HeidelbergCement merger, Hanson products may be rebranded or consolidated under the Holcim product range in some markets — confirm current product name and availability with the local Holcim/Hanson trade representative before specifying. Trial panel mandatory before colour approval.