Repair Systems — 03 — Facade & External Envelope
Multi-finish render coatings
Technical product reference for multi-finish render coatings — Westox Plastalite Multifinish for masonry and concrete facade surfaces.
Multi-finish render coatings
Multi-finish render coats are applied as a final finishing layer over base render coats or direct to block and masonry to provide a smooth or semi-smooth surface suitable for subsequent decoration or topcoat application. They are used in remedial facade works to correct minor surface irregularities and achieve a consistent finish before painting. Westox Plastalite Multifinish is a pre-bagged multi-finish render coat for masonry and concrete surfaces. Confirm current specifications with Westox technical before specifying.
Product Reference
1 product — Westox — multi-finish render coating systems
Westox Plastalite Multifinish 20kg
Multi-finish render coat — masonry and concrete surfaces
System Description
Westox Plastalite Multifinish is a pre-bagged multi-finish render coat for masonry and concrete surfaces. Multi-finish render coats are used as a final finishing layer over base render coats or direct to block/masonry to provide a smooth or semi-smooth surface suitable for subsequent decoration or topcoat application. Multi-finish products are used in remedial facade works to provide a consistent and even surface finish before painting or texture coating application, and can also be used to correct minor surface irregularities in repaired render substrates. Confirm current product technical data sheet, water ratio, coverage, finish profile, coat thickness, and compatible topcoat system with Westox technical before specifying.
Technical Properties
- Pre-bagged multi-finish render coat — suitable for masonry and concrete surfaces
- Provides smooth or semi-smooth finish suitable for subsequent paint or texture coating
- Confirm water ratio, coverage, finish profile, coat thickness, and compatible topcoat from current Westox Plastalite Multifinish TDS
Limitations
- Confirm current product formulation and system specifications with Westox technical before specifying
- Multi-finish coats are thin-section finishing layers — not suitable as a primary structural render replacement
- Confirm compatibility with subsequent topcoat and paint system with Westox before specifying
PROCUREMENT SOURCES
Confirm suitability with the current manufacturer TDS before specifying or applying.
Disclaimer
Confirm product selection against current TDS and project specification. Do not rely on this reference as a substitute for professional advice.